DA210-004YMK3
Right-rotating drill with MORSE taper - for the optimum drilling and reaming operations - for the construction in the ship building-, aviation and automotive industry, as well as the machine building industry.
When using this drill with the optional available grip-tube, this drill may also be used as a universal drill with equally benefical results. The drill is equipped with a feed-spindle that is also used for the removal of the drill bit. As an optional feature, we can offer the model DA 210 with a ratchet instead of the pilot-wheel. For extreme tight access areas, we offer reduced profile drill designs, without feed-spindle or pilot-wheel. Our drill is additionally equipped with a speed regulator, which helps to reduce the air consumption when idling.
| Max. power output | 2100 W / 2.82 hp |
|---|---|
| Speed (no load) | 400 min-1 |
| Weight | 11,7 kg / 25.79 lbs |
| Drive | vane motor |
| Assortment | Additional Assortment |
| Start | twist valve |
| Rotation | right |
| Nominal speed | 280 min-1 |
| Air consumption (no load) | 0,8 m3/min / 28.25 cfm |
| Air consumption (loaded) | 2,1 m3/min / 74.15 cfm |
| I.D. of air inlet hose | 15 mm / .59 in |
| Morse taper | 3 |
| Drilling into steel to | 32 mm / 1.26 in |
| Reaming up to | 27 mm / 1.06 in |
| Air connection | thread 1/2" female |
| Operating pressure | 6,3 bar / 90 psi |
| Quick release coupling |
|
804351 |
|---|