DA220-003YMK4
Right-rotating drill with MORSE taper - for the optimum drilling and reaming operations - for the construction in the ship building-, aviation and automotive industry, as well as the machine building industry.
When using this drill with the optional available grip-tube, this drill may also be used as a universal drill with equally benefical results. The drill is equipped with a feed-spindle that is also used for the removal of the drill bit. As an optional feature, we can offer the model DA 220 with a ratchet instead of the pilot-wheel. For extreme tight access areas, we offer reduced profile drill designs, without feed-spindle or pilot-wheel. Our drill is additionally equipped with a speed regulator, which helps to reduce the air consumption when idling.
| Max. power output | 2200 W / 2.95 hp |
|---|---|
| Speed (no load) | 300 min-1 |
| Weight | 13,9 kg / 3.64 lbs |
| Drive | vane motor |
| Assortment | Additional Assortment |
| Start | twist valve |
| Rotation | right |
| Nominal speed | 220 min-1 |
| Air consumption (no load) | 1 m3/min / 35.30 cfm |
| Air consumption (loaded) | 2,2 m3/min / 77.7 cfm |
| I.D. of air inlet hose | 19 mm / .75 in |
| Morse taper | 4 |
| Drilling into steel to | 50 mm / 1.97 in |
| Reaming up to | 36 mm / 1.42 in |
| Air connection | thread 1/2" female |
| Operating pressure | 6,3 bar / 90 psi |
| Quick release coupling |
|
804351 |
|---|