DS310-001YRMK5
Reversible drill with MORSE taper for the drilling, grating, counter-sinking, tapping and the milling of pipes.
With T-handle - with integrated twist-valve for start - located on the same axis, the drill is equipped with spindle-feed and pilot wheel. With gearing to achieve the optimal operating speed and to achieve the best-possible drilling result.
Objednací číslo
3017171B
| Max. power output | 3100 W / 4.16 hp |
|---|---|
| Speed (no load) | 150 min-1 |
| Weight | 34 kg / 74.96 lbs |
| Drive | vane motor |
| Assortment | Additional Assortment |
| Start | twist valve |
| Rotation | right |
| Nominal speed | 80 min-1 |
| Air consumption (loaded) | 2,8 m3/min / 98.87 cfm |
| I.D. of air inlet hose | 19 mm / .75 in |
| Morse taper | 5 |
| Spindle stroke | 110 mm / 4.33 in |
| Drilling into steel to | 80 mm / 3.15 in |
| Reaming up to | 75 mm / 2.95 in |
| Tapping into steel to | 100 mm / 3.94 |
| Milling of pipes | 120 mm / 4.72 in |
| Air connection | thread 3/4" female |
| Operating pressure | 6,3 bar / 90 psi |
Standard Equipment
| Quick release coupling |
|
804352 |
|---|