GA811-100BX
Our angle grinder with angle gear - for the scrubbing and leveling of cast-iron parts, steel parts, welding seams, non-ferrous metals of all types and rock, as well as for any other fabrication areas, such as the steel construction and container construction, for machine building, in foundries and concrete construction.
- For grinding or when used with cut-off wheels of type 27, 41/42, for the best-possible grinding results even on hard-to-reach areas
- Integrated ABU (auto-balancing-unit) reduces vibration and allows a fatique-free operation
- The integrated speed regulator holds the speed of the tool constant, even when tool is operated at full load. Low air consumption.
Objednací číslo
6060546A
| Max. power output | 1000 W / 1.34 hp |
|---|---|
| Speed (no load) | 13200 min-1 |
| Weight | 2,4 kg / 5.29 lbs |
| Drive | vane motor |
| Assortment | Standard assortment |
| Start | safety lever |
| Rotation | right |
| Air consumption (no load) | 0,7 m3/min / 24.72 cfm |
| Air consumption (loaded) | 1,2 m3/min / 42.37 cfm |
| Max. radial speed | 80 m/s / 262.5 ft/s |
| I.D. of air inlet hose | 13 mm / .51 in |
| I.D. of grinding wheel | 22,23 mm / .87 in |
| O.D. of grinding wheel | 115 mm / 4.53 in |
| Max. thickness of grinding wheel | 6 mm / .24 in |
| Max. thickness of cutting-off wheel | 2 mm / .08 in |
| Max. cutting depth | 29 mm / 1.14 in |
| Air connection | Nipple |
| Spindle thread | M14 |
| Operating pressure | 6,3 bar / 90 psi |
Standard Equipment
| Pin wrench |
|
828832 |
|---|---|---|
| Allen key 4 mm |
|
800447 |
| Allen key 5 mm |
|
800448 |
| Allen key 6 mm |
|
800449 |
Optional Accessories
| Rubber backing pad ø 115 mm |
|
6022419 |
|---|