GDST050-550BXO
Our pneumatic grinder fulfill all requirements for an optimum fabrication - for an optimum material removal using a carbide cutter (grinding insert) or grinding tip, for consistent and quality performance.
This turbine grinder operates oilfree and is therefore practically maintenance free. Optimum fabrication results. Due to the high speed, these toll is especially well-suited to the use with carbide cutters. The low weight assures a fatique-free effort. Includes a speed governor for optimal performance. Lower levels of vibration- and noise emissions compared to standard air-grinders. Your advantage. Extreme low air consumption.
Well balanced 6 mm collet (Standard Equipment). With supply/exhaust hose.
Objednací číslo
6061040A
| Max. power output | 500 W / .67 hp |
|---|---|
| Speed (no load) | 55000 min-1 |
| Weight | 0,8 kg / 1.76 lbs |
| Drive | turbine drive |
| Assortment | Standard assortment |
| Start | safety lever |
| Design | Basic Design |
| Rotation | right |
| Air consumption (no load) | 0,13 m3/min / 4.59 cfm |
| Air consumption (loaded) | 0,74 m3/min / 26.13 cfm |
| I.D. of air inlet hose | 10 mm / .39 in |
| Weight (air connection) | 0,45 kg / .99 lbs |
| Max. Ø of grinding tip | 16 mm / .63 in |
| Max. Ø of grinding insert | 12 mm / .47 in |
| Length of supply/exhaust hose | 2/1 m / 6.6/3.3 ft |
| Collets - clamping range | 6 [3; 4; 5; 1/8''; 3/16'';1/4''] mm |
| Air connection | Nipple |
| Operating pressure | 6,3 bar / 90 psi |
Standard Equipment
| Collet ø 6 mm |
|
6014315 |
|---|---|---|
| Spanner 10 mm |
|
800402 |
| Spanner 14 mm |
|
800410 |
| Nipple |
|
315071 |
Optional Accessories
| Collet ø 3 mm |
|
6014316 |
|---|---|---|
| Collet ø 4 mm |
|
6014318 |
| Collet ø 5 mm |
|
6014319 |
| Collet ø 1/8'' |
|
6014320 |
| Collet ø 1/4'' |
|
6014314 |
| Collet ø 3/16'' |
|
6014321 |