GDST050-550VXO
Our pneumatic grinder fulfill all requirements for an optimum fabrication - for an optimum material removal using a carbide cutter (grinding insert) or grinding tip, for consistent and quality performance.
This turbine grinder operates oilfree and is therefore practically maintenance free. Optimum fabrication results. Due to the high speed, these toll is especially well-suited to the use with carbide cutters. The low weight assures a fatique-free effort. Includes a speed governor for optimal performance. Lower levels of vibration- and noise emissions compared to standard air-grinders. Your advantage. Extreme low air consumption.
Well balanced 6 mm collet (Standard Equipment). With supply/exhaust hose.
Objednací číslo
6061110A
| Max. power output | 500 W / .67 hp |
|---|---|
| Speed (no load) | 55000 min-1 |
| Weight | 0,7 kg / 1.54 lbs |
| Drive | turbine drive |
| Assortment | Additional Assortment |
| Start | safety lever |
| Design | Long design |
| Rotation | right |
| Air consumption (no load) | 0,13 m3/min / 4.59 cfm |
| Air consumption (loaded) | 0,74 m3/min / 26.13 cfm |
| I.D. of air inlet hose | 10 mm / .39 in |
| Max. Ø of grinding tip | 16 mm / .63 in |
| Max. Ø of grinding insert | 12 mm / .47 in |
| Length of supply/exhaust hose | 2/1 m / 6.6/3.3 ft |
| Collets - clamping range | 6 [3; 4; 5; 1/8''; 3/16'';1/4''] mm |
| Air connection | Nipple |
| Operating pressure | 6,3 bar / 90 psi |
Standard Equipment
| Collet ø 6 mm |
|
6014315 |
|---|---|---|
| Spanner 10 mm |
|
800402 |
| Spanner 14 mm |
|
800410 |
| Nipple |
|
315071 |
Optional Accessories
| Collet ø 3 mm |
|
6014316 |
|---|---|---|
| Collet ø 4 mm |
|
6014318 |
| Collet ø 5 mm |
|
6014319 |
| Collet ø 1/8'' |
|
6014320 |
| Collet ø 1/4'' |
|
6014314 |
| Collet ø 3/16'' |
|
6014321 |