HC010-H10B
Our small straight chipping hammer is used in the building industry (light chipping- and demolition work, grooving, cleaning-off, plaster removal), foundry industry (cleaning of castings, chipping of discard beads and welds), and in stone industry (wedging, dressing etc.).
Your advantages: Easy exchange of the chisels, highly durable, simple operation.
Objednací číslo
6060006A
| Weight | 1 kg / 2.20 lbs |
|---|---|
| Impact per minute | 9000 min-1 |
| Insertion tip | Hex. 10x25 mm |
| Air consumption (no load) | 0,2 m3/min / 7.06 cfm |
| Assortment | Standard assortment |
| Start | safety lever |
| I.D. of air inlet hose | 6 mm / .24 in |
| Impact per minute | 150 min-1 |
| Air connection | thread 1/4" female |
| Operating pressure | 6,3 bar / 90 psi |
Standard Equipment
| O ring 12x2 mm |
|
802512 |
|---|---|---|
| Flat chisel HR 10x25 mm, length 180 mm, width 20 mm |
|
6074190 |
| Hose Nozzle |
|
801280 |
Optional Accessories
| Chisel pointed, HR 10x25 mm, length 100 mm |
|
6074189 |
|---|---|---|
| Chisel pointed, HR 10x25 mm, length 200 mm, hardmetall |
|
6074179 |
| Chisel pointed, HR 10x25 mm, length 200 mm |
|
6074178 |
| Chisel pointed, HR 10x25 mm, length 250 mm |
|
6074181 |
| Chisel pointed, HR 10x25 mm, length 350 mm |
|
6074180 |
| Flat chisel HR 10x25 mm, length 180 mm, width 20 mm |
|
6074190 |
| Flat chisel, HR 10x25 mm, length 180 mm, width 50 mm |
|
6074184 |
| Flat chisel, HR 10x25 mm, length 180 mm, width 50 mm |
|
6074186 |
| Flat chisel, HR 10x25 mm, length 200 mm, width 50 mm |
|
6074185 |
| Flat chisel, HR 10x25 mm, length 250 mm,width 20 mm |
|
6074182 |
| Flat chisel, HR 10x25 mm, length 250 mm, width 12 mm |
|
6074183 |
| Flat chisel, HR 10x25 mm, length 180 mm, width 10 mm |
|
6074523 |
| Chisel profiled, HR 10x25 mm, length 210 mm, width 23 mm |
|
6074188 |
| Chisel profiled, for sheet metal cutting, HR 10x25 mm, length 135 mm, width 18 mm |
|
6074187 |