HR093-MK2B
Our impact hammer with MORSE taper is used in many applications, such as the scaling of forgings when used with tampered- or rubber butts, the cleaning of Open-Hearth- or Electric Ovens, for the compacting of concrete and dirt during construction, as well as for fabrication in the cement- and stone production.
Your advantages: Highlys durable, simple operation, robust.
Objednací číslo
2701571A
| Weight | 9,3 kg / 20.50 lbs |
|---|---|
| Impact per minute | 650 min-1 |
| Assortment | Additional Assortment |
| I.D. of air inlet hose | 13 mm / .51 in |
| Air consumption (no load) | 0,8 m3/min / 28.25 cfm |
| Piston-Ø | 32 mm / 1.26 in |
| Piston stroke | 160 mm / ø 6.30 in |
| Morse taper | 2 |
| Air connection | thread 1/2" female |
| Impact per minute - Hz | 10,8 Hz |
| Operating pressure | 6,3 bar / 90 psi |
Standard Equipment
| Quick release coupling |
|
804351 |
|---|
Optional Accessories
| Butt (rubber MK 2, Ø 40 mm) |
|
804837 |
|---|---|---|
| Butt (cast iron MK 2, Ø 60 mm) |
|
804827 |
| Butt (rubber MK 2, Ø 60 mm) |
|
804839 |
| Butt (cast iron MK 2, Ø 80 mm) |
|
804828 |
| Butt (cast iron, MK 2, quadratic - 60x60 mm) |
|
804847 |
| Butt (rubber MK 2, quadratic - 80x80 mm) |
|
804856 |
| Butt (cast iron, MK 2, square - 60x20 mm) |
|
804862 |
| Butt (rubber MK 2, square 75x45 mm) |
|
804871 |
| Butt (cast iron, MK 2, square - 75x50 mm) |
|
804865 |
| Butt (rubber MK 2, wedge - 50x25 mm) |
|
804884 |
| Butt (rubber MK 2, wedge 70x50 mm) |
|
804885 |
| Butt (rubber MK 2, wedge 75x25 mm) |
|
804886 |
| Butt (rubber MK 2, wedge 70x50 mm) |
|
804887 |
| Chisel to butt-releasing |
|
804890 |